EPD Extension Kit Gen 2 (EXT2)

< Back to products

EPD Extension Kit Generation 2 is an extension board to connect with your product to kick-start EPD applications. There are onboard headers can be bridged to any of your chosen evaluation kit or current product.


  • Support driving E ink epaper displays made by Pervasive with eTC or iTC driver IC embedded Aurora or Spectra material film from 1.44″ to 12″
  • On board driving circuit as a starter kit to easily develop EPD application with your product
  • Direct socket to stack on TI LaunchPads to get various libraries and technical supports from TI
  • Open driving source code
  • Free powerful utility to test and demonstration with EPD
  • On board 8M bits Flash memory and temperature sensor
  • Provide bridging cable and header to connect with your product and any evaluation kit
  • Provide touch panel and light guide connector to support EPD integration

EXT2 Model no.: B3000MS034  / EXT2 with Connector board for 9.7″ or 12″: B3000MS035


Find the detailed introduction and files of EXT2 kit here.

Purchasing information

Size range
Small to Medium size
Large size
(1) EPD size1.54" to 7.4"9.7" or 12"
NoteClick on the EPD size above and click the Buy button in the specific display webpage, then come back to this page to select the EXT2 type + EVK below
(2) EXT2 TypeEXT2 kit: DigiKey or MouserEXT2 with connector board: DigiKey or Mouser
(3) EVKSelect a EVK (development kit) to kick-start your development if you don't have one:
Arduino, LaunchPad, Raspberry Pi, Adafruit Feather or any of your working EVK…